Rotary Coaxial Cable Stripping Tool

Coaxial Cable Stripping Tool
For UTP/STP. RG59/6/11/7
Features:
Strips outer jacket of UTP and STP cable and CAT 5 round telephone cable
Strips RG-59/6/11/7 coaxial cable
Strips flat telephone cable
Cable cutter function
Instructions:
1.Push the cassette out of the housing,push from the front of the cassette.
2.Cassette is reversible,one side is available for RG59/6 and side is for RG7/11.
3.For stripping coaxial cable:
a.Insert the cable until  aligns with the cable guide.
b.Insert your index finger into the the stripper's finger ring,rotate the stripper by counter clockwise 3-5 times.
c.Open the jaws and remove the cable.Push away the outer jacket and dielectric to expose the inner conductor.
d.stripping distance is designed for 6mm,for each dielectric and iner conduct.
4.For stripping round networking cable:
a.insert the cable into the second stripping hole,rotate 1-3 times at counte clockwise,and then open the jaw and remove the outer jacket.
b.The black coler adjusting knob is for adjusting the blade's dpth. Turn clockwise for increasing the blade's depth and counter clockwise for reducing the depth.
5.For cutting coaxial cable,round networking cable or flat telephone cable,place the cable in position and then squeeze the handles.
6.For stripping flat cable,insert the cable between the stripper blades. Squeeze handles,cable must be kept perpendicular and then pull from the tool.
a.Insert 4P/6P cable into the two-bladed side of the tool's striper until it touches the stop guide.
b.Insert 8P cable into the two-bladed side of the tool's stripper and let it extend a little past the lower cut blade.

Instructions

Coaxial Cable Stripping Tool
For UTP/STP. RG59/6/11/7
Features:
Strips outer jacket of UTP and STP cable and CAT 5 round telephone cable
Strips RG-59/6/11/7 coaxial cable
Strips flat telephone cable
Cable cutter function
Instructions:
1.Push the cassette out of the housing,push from the front of the cassette.
2.Cassette is reversible,one side is available for RG59/6 and side is for RG7/11.
3.For stripping coaxial cable:
a.Insert the cable until  aligns with the cable guide.
b.Insert your index finger into the the stripper's finger ring,rotate the stripper by counter clockwise 3-5 times.
c.Open the jaws and remove the cable.Push away the outer jacket and dielectric to expose the inner conductor.
d.stripping distance is designed for 6mm,for each dielectric and iner conduct.
4.For stripping round networking cable:
a.insert the cable into the second stripping hole,rotate 1-3 times at counte clockwise,and then open the jaw and remove the outer jacket.
b.The black coler adjusting knob is for adjusting the blade's dpth. Turn clockwise for increasing the blade's depth and counter clockwise for reducing the depth.
5.For cutting coaxial cable,round networking cable or flat telephone cable,place the cable in position and then squeeze the handles.
6.For stripping flat cable,insert the cable between the stripper blades. Squeeze handles,cable must be kept perpendicular and then pull from the tool.
a.Insert 4P/6P cable into the two-bladed side of the tool's striper until it touches the stop guide.
b.Insert 8P cable into the two-bladed side of the tool's stripper and let it extend a little past the lower cut blade.

Our Services

·    Your inquiry will be replied within 24 hours.

·    Well-trained & experienced sales can reply your inquiries in English.

·    OEM & ODM projects are highly welcomed.  

·    Your business relationship with us will be confidential to any third party.

·    Good after-sale service.